VingtSwapV3Pool

Functions​

_blockTimestamp​

  function _blockTimestamp(
  ) internal view virtual returns (uint32)

Returns the block timestamp truncated to 32 bits, i.e. mod 2**32. This method is overridden in tests.

snapshotCumulativesInside​

  function snapshotCumulativesInside(
    int24 tickLower,
    int24 tickUpper
  ) external view override noDelegateCall returns (int56 tickCumulativeInside, uint160 secondsPerLiquidityInsideX128, uint32 secondsInside)

Returns a snapshot of the tick cumulative, seconds per liquidity and seconds inside a tick range

Snapshots must only be compared to other snapshots, taken over a period for which a position existed. I.e., snapshots cannot be compared if a position is not held for the entire period between when the first snapshot is taken and the second snapshot is taken.

Parameters:​

Name	Type	Description
tickLower	int24	The lower tick of the range
tickUpper	int24	The upper tick of the range

Return Values:​

Name	Type	Description
tickCumulativeInside	int56	The snapshot of the tick accumulator for the range
secondsPerLiquidityInsideX128	uint160	The snapshot of seconds per liquidity for the range
secondsInside	uint32	The snapshot of seconds per liquidity for the range

observe​

  function observe(
    uint32[] secondsAgos
  ) external view override noDelegateCall returns (int56[] tickCumulatives, uint160[] secondsPerLiquidityCumulativeX128s)

Returns the cumulative tick and liquidity as of each timestamp secondsAgofrom the current block timestamp

To get a time weighted average tick or liquidity-in-range, you must call this with two values, one representing the beginning of the period and another for the end of the period. E.g., to get the last hour time-weighted average tick, you must call it with secondsAgos = [3600, 0]. The time weighted average tick represents the geometric time weighted average price of the pool, in log base sqrt(1.0001) of token1 / token0. The TickMath library can be used to go from a tick value to a ratio.

Parameters:​

Name	Type	Description
secondsAgos	uint32[]	From how long ago each cumulative tick and liquidity value should be returned

Return Values:​

Name	Type	Description
tickCumulatives	int56[]	Cumulative tick values as of each secondsAgosfrom the current block timestamp
secondsPerLiquidityCumulativeX128s	uint160[]	Cumulative seconds per liquidity-in-range value as of each secondsAgosfrom the current block

timestamp

increaseObservationCardinalityNext​

  function increaseObservationCardinalityNext(
    uint16 observationCardinalityNext
  ) external override lock noDelegateCall

Increase the maximum number of price and liquidity observations that this pool will store

This method is no-op if the pool already has an observationCardinalityNext greater than or equal to the input observationCardinalityNext.

Parameters:​

Name	Type	Description
observationCardinalityNext	uint16	The desired minimum number of observations for the pool to store

initialize​

  function initialize(
    uint160 sqrtPriceX96
  ) external override

Sets the initial price for the pool

not locked because it initializes unlocked

Parameters:​

Name	Type	Description
sqrtPriceX96	uint160	the initial sqrt price of the pool as a Q64.96

mint​

  function mint(
    address recipient,
    int24 tickLower,
    int24 tickUpper,
    uint128 amount,
    bytes data
  ) external override lock returns (uint256 amount0, uint256 amount1)

Adds liquidity for the given recipient/tickLower/tickUpper position

noDelegateCall is applied indirectly via _modifyPosition

Parameters:​

Name	Type	Description
recipient	address	The address for which the liquidity will be created
tickLower	int24	The lower tick of the position in which to add liquidity
tickUpper	int24	The upper tick of the position in which to add liquidity
amount	uint128	The amount of liquidity to mint
data	bytes	Any data that should be passed through to the callback

Return Values:​

Name	Type	Description
amount0	uint256	The amount of token0 that was paid to mint the given amount of liquidity. Matches the value in the callback
amount1	uint256	The amount of token1 that was paid to mint the given amount of liquidity. Matches the value in the callback

collect​

  function collect(
    address recipient,
    int24 tickLower,
    int24 tickUpper,
    uint128 amount0Requested,
    uint128 amount1Requested
  ) external override lock returns (uint128 amount0, uint128 amount1)

Collects tokens owed to a position

Does not recompute fees earned, which must be done either via mint or burn of any amount of liquidity. Collect must be called by the position owner. To withdraw only token0 or only token1, amount0Requested or amount1Requested may be set to zero. To withdraw all tokens owed, caller may pass any value greater than the actual tokens owed, e.g. type(uint128).max. Tokens owed may be from accumulated swap fees or burned liquidity.

Parameters:​

Name	Type	Description
recipient	address	The address which should receive the fees collected
tickLower	int24	The lower tick of the position for which to collect fees
tickUpper	int24	The upper tick of the position for which to collect fees
amount0Requested	uint128	How much token0 should be withdrawn from the fees owed
amount1Requested	uint128	How much token1 should be withdrawn from the fees owed

Return Values:​

Name	Type	Description
amount0	uint128	The amount of fees collected in token0
amount1	uint128	The amount of fees collected in token1

burn​

  function burn(
    int24 tickLower,
    int24 tickUpper,
    uint128 amount
  ) external override lock returns (uint256 amount0, uint256 amount1)

Burn liquidity from the sender and account tokens owed for the liquidity to the position

noDelegateCall is applied indirectly via _modifyPosition

Parameters:​

Name	Type	Description
tickLower	int24	The lower tick of the position for which to burn liquidity
tickUpper	int24	The upper tick of the position for which to burn liquidity
amount	uint128	How much liquidity to burn

Return Values:​

Name	Type	Description
amount0	uint256	The amount of token0 sent to the recipient
amount1	uint256	The amount of token1 sent to the recipient

swap​

  function swap(
    address recipient,
    bool zeroForOne,
    int256 amountSpecified,
    uint160 sqrtPriceLimitX96,
    bytes data
  ) external override noDelegateCall returns (int256 amount0, int256 amount1)

Swap token0 for token1, or token1 for token0

Parameters:​

Name	Type	Description
recipient	address	The address to receive the output of the swap
zeroForOne	bool	The direction of the swap, true for token0 to token1, false for token1 to token0
amountSpecified	int256	The amount of the swap, which implicitly configures the swap as exact input (positive), or exact output (negative)
sqrtPriceLimitX96	uint160	The Q64.96 sqrt price limit. If zero for one, the price cannot be less than this value after the swap. If one for zero, the price cannot be greater than this value after the swap
data	bytes	Any data to be passed through to the callback

Return Values:​

Name	Type	Description
amount0	int256	The delta of the balance of token0 of the pool, exact when negative, minimum when positive
amount1	int256	The delta of the balance of token1 of the pool, exact when negative, minimum when positive

flash​

  function flash(
    address recipient,
    uint256 amount0,
    uint256 amount1,
    bytes data
  ) external override lock noDelegateCall

Receive token0 and/or token1 and pay it back, plus a fee, in the callback

Parameters:​

Name	Type	Description
recipient	address	The address which will receive the token0 and token1 amounts
amount0	uint256	The amount of token0 to send
amount1	uint256	The amount of token1 to send
data	bytes	Any data to be passed through to the callback

setFeeProtocol​

  function setFeeProtocol(
    uint8 feeProtocol0,
    uint8 feeProtocol1
  ) external override lock onlyFactoryOwner

Set the denominator of the protocol's % share of the fees

Parameters:​

Name	Type	Description
feeProtocol0	uint8	new protocol fee for token0 of the pool
feeProtocol1	uint8	new protocol fee for token1 of the pool

collectProtocol​

  function collectProtocol(
    address recipient,
    uint128 amount0Requested,
    uint128 amount1Requested
  ) external override lock onlyFactoryOwner returns (uint128 amount0, uint128 amount1)

Collect the protocol fee accrued to the pool

Parameters:​

Name	Type	Description
recipient	address	The address to which collected protocol fees should be sent
amount0Requested	uint128	The maximum amount of token0 to send, can be 0 to collect fees in only token1
amount1Requested	uint128	The maximum amount of token1 to send, can be 0 to collect fees in only token0

Return Values:​

Name	Type	Description
amount0	uint128	The protocol fee collected in token0
amount1	uint128	The protocol fee collected in token1